Legged mobility
- Twelve joint motors: walk, trot, climb stairs and curbs, cross uneven or crowded ground
- Up to 40° climb angle and 16 cm step height (Pro and EDU)
- Same chassis and gait across all three editions
AVAILABLE NOW
Unitree Go2 Quadruped
$1,600.00
Tax and shipping excluded.
1–4 hours
Battery Life
By edition
12 motors
Joint Motors
Four-legged articulation
400 mm
Standing Height
Knee-height quadruped
Quadruped Mobility for Activations, Events & Development
Standing 400 mm and weighing about 15 kg, Go2 runs a 12-motor chassis that walks, trots, holds poses and climbs stairs and curbs — controlled from a phone app or the included remote, and folded into a case small enough for one person to carry.
Editions scale from the app-first Go2 Air, through Go2 Pro with 4D LiDAR L2, an 8-core CPU and a 4G module for autonomous following and navigation, to Go2 EDU with a full low-level SDK, RealSense depth camera, foot-force sensors, NVIDIA Jetson Orin compute and a 15,000 mAh long-endurance battery.
What's Included
Unitree Go2
12 joint motors, ready to deploy
Remote Controller
+ Unitree mobile app
Battery
8,000 mAh · 15,000 mAh on EDU
Charger
Standard charger
Built to move where people and wheels can't.
A legged robot goes up stairs, over curbs, and across a crowded floor that a wheeled unit can't cross. Go2 greets, poses, follows, and records-and-replays a routine, on four legs at knee height.
Standard – Jetson Orin
Onboard Compute (by edition)
~45 N·m
Joint Torque
12
Total Joint Motors
16 cm / 40°
Max Climb (Pro, EDU)
~15 kg
Weight (with Battery)
10–12 kg
Payload
Go2 Base Specifications
- Onboard Compute (Air)
- Standard controller (app-level control)
- Onboard Compute (Pro)
- 8-core high-performance CPU
- Onboard Compute (EDU)
- NVIDIA Jetson Orin (40 or 100 TOPS, per config)
- Perception (Air)
- HD camera
- Perception (Pro)
- 4D LiDAR L2 (360° × 96°)
- Perception (EDU)
- 4D LiDAR L2 + Intel RealSense D435i + 4× foot-force sensors
- IMU
- Built-in
- Dimensions (Standing)
- 700 × 310 × 400 mm
- Dimensions (Folded)
- 760 × 310 × 200 mm
- Weight
- ~15 kg (with battery)
- Battery
- 8,000 mAh · 15,000 mAh long-endurance (EDU)
- Operating Time
- ~1–2 hours · ~2–4 hours (EDU)
- Max Speed
- 2.5 m/s (Air) · 3.5 m/s (Pro) · 3.7 m/s (EDU)
- Joint Torque
- ~45 N·m (Pro, EDU)
- Max Climb Height
- 15 cm (Air) · 16 cm (Pro, EDU)
- Max Climb Angle
- 30° (Air) · 40° (Pro, EDU)
- Payload
- Up to 10 kg · up to 12 kg (EDU)
- Total Joint Motors
- 12
- Legs
- 4 × 3 joints
- Connectivity
- WiFi + Bluetooth · +4G / ISS 2.0 (Pro, EDU)
- Control
- Mobile app + remote · +SDK on EDU
- SDK / Secondary Development
- None (Air) · limited (Pro) · full low-level SDK + ROS2 (EDU)
- Record & Replay
- Supported
- Additional Batteries
- Compatible
- Chargers
- Standard charger included
- Remote Controllers
- Included
Key capabilities
Built to move where people and wheels can't
A legged robot goes up stairs, over curbs, and across a crowded floor a wheeled unit can't cross — greeting, posing, following and replaying a routine at knee height.
Greet, pose, and interact
- Preset motions and a record-and-replay feature
- Greet guests, hold a pose for photos, follow a host, repeat a choreographed routine on cue
- The core of an event or brand activation
Autonomy & open development (Pro / EDU)
- 4D LiDAR gives 360° spatial awareness: obstacle avoidance and person-following, no driver needed
- Full low-level SDK with direct joint-torque control (EDU)
- Foot-force sensing, depth camera, Jetson Orin compute up to 100 TOPS (EDU)
— COMPARE EDITIONS
Go2 Air vs Go2 Pro vs Go2 EDU
Same 12-motor chassis and gait across the range. Editions differ in perception, onboard compute, connectivity, battery and how far you can program the robot.
ENTRY
Unitree Go2 Air
Entry quadruped for app-driven activations
$1,600
- 12 joint motors · 2.5 m/s
- 15 cm climb / 30°
- Standard controller · HD camera · no LiDAR
- No SDK — app and remote control
EVENT PICK
Unitree Go2 Pro
LiDAR navigation + 4G
$2,800
- 12 joint motors · 3.5 m/s
- 16 cm climb / 40° · ~45 N·m joint torque
- 8-core CPU · 4D LiDAR L2 · ISS 2.0 · 4G
- Navigates and follows on its own
EDU UNLOCKED
Unitree Go2 EDU
Full low-level SDK + onboard AI compute
Contact Sales
- 12 joint motors · 3.7 m/s · 12 kg payload
- Jetson Orin (40 or 100 TOPS, per config)
- 4D LiDAR L2 + RealSense D435i + 4× foot-force sensors
- Full low-level SDK, ROS2 · 2–4 h runtime
Showing 15 specifications — 12 differ between editions
Swipe to see all 3 models
Specification
Unitree Go2 Air
ENTRY
Unitree Go2 Pro
EVENT PICK
Unitree Go2 EDU
EDU UNLOCKED
Unitree Go2 AirENTRY
Unitree Go2 ProEVENT PICK
Unitree Go2 EDUEDU UNLOCKED
Price
$1,600
$2,800 DIFF
Quote DIFF
Height
400 mm
400 mm
400 mm
Weight
Approx. 15 kg
Approx. 15 kg
Approx. 15 kg
Total Joint Motors
12
12
12
Max Speed
2.5 m/s
3.5 m/s DIFF
3.7 m/s DIFF
Joint Torque
Not stated
Approx. 45 N·m DIFF
Approx. 45 N·m peak DIFF
Max Climb Height
15 cm
16 cm DIFF
16 cm DIFF
Max Climb Angle
30°
40° DIFF
40° DIFF
Perception
HD camera
4D LiDAR L2 DIFF
4D LiDAR L2 + RealSense depth DIFF
Onboard Compute
Standard
8-core CPU DIFF
Jetson Orin (40/100 TOPS) DIFF
Connectivity
Wi-Fi + Bluetooth
+ 4G / ISS 2.0 DIFF
+ 4G / ISS 2.0 DIFF
Payload
up to 10 kg
up to 10 kg
up to 12 kg DIFF
Battery
8,000 mAh
8,000 mAh
15,000 mAh DIFF
Operating Time
1 to 2 h
1 to 2 h
2 to 4 h DIFF
SDK / Secondary Development
No
Limited DIFF
Full DIFF
